OldNews: Difference between revisions

From K-LUG Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(164 intermediate revisions by 3 users not shown)
Line 3: Line 3:




=== Virtual Social: Thursday October 10th ===
6 pm


=== Lunch:  Thursday November 21st  ===
Yes, timing worked out that you'll see us twice in the same week.
11:30 am, Apache Mall food court, near B&N.


Meeting link removed.


=== Technical Meeting:  Thursday November 14th ===
Anything else you want to see on the agenda? Let us know.
Dennis DeLorme


AATiny remote project, Dennis has provided the following description.


"Many of you know the Ardunio as an easy to use hardware and software development system for the ATmega328 microcontroller. For many projects the Ardunio board may be too expensive to dedicate to a project. There are smaller, cheaper ATmega328 boards that can be used if not all the options of the full Arduino board are needed.
=== Potential October outdoor social - 18 holes of mini golf ===
https://bringmethenews.com/minnesota-lifestyle/new-18-hole-mini-golf-course-coming-to-rochester
https://krocnews.com/rochester-mns-largest-mini-golf-course-is-about-to-open/


But what if that is still too expensive for a very simple project? The Ardunio system can be used to develop code and program smaller Atmel chips like the ATtiny84A and ATtiny85 chips. The ATtiny84A has 14 pins, the ATtiny85 has 8 pins. The chips have a subset of the features of the ATmega328, for example only 8K of flash and 512 bytes of ram. They are less than $2 in small quantity and include an internal oscillator, so minimal external parts are required.


ATtiny84A
=== Socials brainstorming: Fall or winter ===
http://www.atmel.com/Images/doc8183.pdf
-Murder mystery. The host needs to buy a kit at a gaming store to get the event started.


ATtiny85
-Jim Henderson, "Silicon Valley" documentary
http://www.atmel.com/Images/Atmel-2586-AVR-8-bit-Microcontroller-ATtiny25-ATtiny45-ATtiny85_Datasheet.pdf


To use the the Arduino environment some addition files need to be downloaded and added to the sketchbook to describe the chips to the compiler and loader. Then the code can be written and the chip programed with just a few extra mouse clicks.
-Bowlocity laser tag. 5-6 people minimum needed.


I will show how to set up the environment for the ATtiny84A and ATtiny85. After that we will go through a project to use the ATtiny85 to decode an IR remote control and control a couple of output pins."
-Liquid nitrogen ice cream. This needs a non-Tina organizer.  Dennis DeLorme has 2 recipes.  We need safety equipment and someone trained enough to keep us from freezing ourselves.


[[Media:ATtinyPresentation.pdf]]


=== Pending potential presentations  ===


6 pm, in or near RCTC Heintz Center's HA107.
Jon Gullixson:  gnucash or www :: Mechanize


[http://www.roch.edu/html-spectrum/getting_to_ucr.html  Directions to Campus]


[http://www.rctc.edu/campustour/maps/heintzA.html  Heintz Center Building Map]


=== Litter Bit Better in-person social (outside), Monday October 7th ===
6:15 - 7:30 pm


This is the first time Rochester is running a fall edition of Litter Bit Better, so we're going to go clean up a second time this year.  Pine Ridge Estates Park, which you may recognize as where we have previously ice cream picnicked, and flown kites.  [https://www.google.com/maps?q=N+43%C2%B0+59.280+W+092%C2%B0+29.070+(GCAYC0F)+ Map]


=== Social #2: Saturday October 26th ===
Bags provided.  You bring your own gloves, grabbers, and sense of civic duty. No shoreline, yes woods (mowed park + woods = 5.1 acres), and you might want a headlamp.
Creative Reuse build day at the Rabbit Hole.


They're going to undertake several re-use activities. Planned are:
As usual we are teaming up with the [https://www.geocaching.com/geocache/GCAYC0F_15-andahalf-cito-and-rochesters-litter-bit-better geocachers] to avoid being overwhelmed by garbage.


-Junk bots creation


-Construction of a secret door for the server room, with a bookcase and a fire alarm door pull
=== Virtual Social: Thursday September 12th ===
6 pm


-Kalidescopes using some glass and mirrors
Meeting link removed.
Anything else you want to see on the agenda? Let us know.




Then they're going to make a stop action video contest submission, this may happen after the 26th due to time constraints.


The Instructables general instructions are here:  http://www.instructables.com/community/October-2013-Build-Night-Creative-Reuse/ .
=== Outside Social:  Thursday September 5th ===


We're meeting at the Toymakers hacker/maker space again. http://tymkrs.com/rabbithole/  
Disc golf! Meet outside the RCTC field house, 6 pm. Here is [http://maps.google.com/maps/ms?msid=217033483939111930234.0004a3795f42da701ae0b&msa=0&ll=44.015742,-92.422206&spn=0.003541,0.006942&iwloc=0004a37962daae4746296 a map].


547 Northern Heights Dr NE


Rochester MN 55906
=== Outside Social:  Friday August 30th ===


Start time is 8 am, but since it's an all day/1 day event for the build, they expect people to come and go throughout the day as their schedule permits.
Disc golf! Meet outside the RCTC field house, 6 pm.  Here is [http://maps.google.com/maps/ms?msid=217033483939111930234.0004a3795f42da701ae0b&msa=0&ll=44.015742,-92.422206&spn=0.003541,0.006942&iwloc=0004a37962daae4746296 a map].




If you want to play at the Rabbit Hole on Friday night October 25th too, you can take a pumpkin <strike>(one you bought at Northwoods Orchard?)</strike> for soldering pumpkin lights and pumpkin carving night.  Bring your own pumpkin and knife.  Need to learn to solder?  This will be a good night for that, bring your own kit or talk to the Toymakers in advance about other potential options (candle flicker simulator).  I'm assuming this one is 6 pm.  They typically order cheap pizza and pop, bring your $5 to pitch in if you want to partake.


=== Virtual Social: Thursday August 8th ===
6 pm


Meeting link removed.


For anyone who haven't been there before, their house is on the north side of the road up a steep and twisted driveway; park on the road with a parking brake. Walk up the driveway, <strike> up the steps, and ring the doorbell. </strike> into the open garage door, and into the house without needing to ring the doorbell.  
Anything else you want to see on the agenda? Let us know.




=== Virtual Social: Thursday July 11th ===
6 pm


Meeting link removed.


=== Lunch:  Thursday October 17th  ===
Anything else you want to see on the agenda? Let us know.
11:30 am, Apache Mall food court, near B&N.


For those curious, the downtown "Galleria" foodcourt is still in construction, they had signs up the other day about hiring for Hot Pot, Asian Noodle, and Dunn Brothers.




=== Outdoor Social:  Thursday June 27th, 11:45 am ===
Lunch at RochesterFest.  We'll be sitting at a picnic table on the far side of the tent from the music, to hopefully lower the decibel level enough to still talk.


=== Technical Meeting: Thursday October 10th ===
Food trailers are supposed to be open by noon, 11:45 am will give us a little better chance at getting parking.
Tim Massaro will present on The Makings of a Maker Space, aka a history of The Rabbit Hole.


The Rabbit Hole is a maker space in Rochester, Mn. A random set of folks partially made of up PCIG and K-Lug members with an eclectic set of  interests including Electronics, Music, Software, Microcontrollers, Hacking, Making, Gadgets, Photography, Solar, Android, Robots, Climbing, Canoeing, Biking...the list goes on and on...
We're less than a year into the maker space world, but have already held many group events from Learn to Solder, to a Learn Lumi Picnic
This presentation will discuss what is a Maker/Hacker space, the Maker revolution, Maker Faires, and highlight some of the Rabbit Hole creations and events including the Recyclotron, Wall-o-Tron and the arrival of our new Carve Wright CNC machine.


=== Virtual Social: Thursday June 13th ===
6 pm


When: Thursday September 12th - 6:00 pm - 7:30 pm
Meeting link removed


Where: RCTC Heintz Center Room HA107
Anything else you want to see on the agenda? Let us know.




=== Virtual Social: Thursday May 9th ===
6 pm


Meeting link removed


=== Social #1:  Saturday October 5th ===
Anything else you want to see on the agenda? Let us know.
<strike> Come for a hike via corn maze in Douglas at [http://www.northwoodsorchard.com/home.html Northwoods Orchard].


Saturday October 5th


1 pm


$5/person for the adult corn maze.  $3/kid for the kid corn maze.  Other activities and items for sale, see their website if you're interested in apples, gourds, pumpkins, etc.
=== Geocaching in-person social (outside), Friday May 3rd ===
6 pm


Unfortunately this is a weather dependent activity and even if the rain has cleared off, if there's too much mud it won't be a lot of fun.
Park and walk in a neighborhood in NE Rochester.


I'll assess the rain, and if necessary call the farm after they open at 10 am to assess the mud level in the maze.  If there's a cancellation, I'll send it out by email by noon (preferably by 11 am, toddler permitting) on Saturday.</strike>
Park near [https://www.geocaching.com/geocache/GC3WQ84 1 - Odin] on Whiting Lane NE's cul de sac.  We'll walk from there to a couple of other geocaches ([https://www.geocaching.com/geocache/GC57FGC 2], [https://www.geocaching.com/geocache/GC4RPZ2 3]), then back to #1, and then decide if we're walking or driving to [https://www.geocaching.com/geocache/GC8M3FP 4].


We had to cancel due to muddy conditions.  1 pm game afternoon at Tina's, for anyone interested.






=== Social:  Saturday September 21st ===
=== Litter Bit Better in-person social (outside), Tuesday April 30th ===
11 am, Oronoco Park.
6:15 - 7:30 pm


Rockets, water bottle rockets, Lumi, and a picnic!
Back to our usual Cascade Lake Park.


There are enough 2L bottles already for the water bottle rockets.  Bring your own rocket+engines for working with our Launchmaster Kevin Arhelger.  We have enough Lumi to make 4 red and 16 orange "prints", you need to do homework (prepare a negative/stencil) and bring a light colored shirt and a dark colored bag.  Bring a potluck dish to pass, a serving utensil, and your own beverage; Tina will provide the plates, forks, and napkins.
Bags provided.  You bring your own gloves, grabbers, and sense of civic duty.  There is shoreline.


As usual we are teaming up with the [https://www.geocaching.com/geocache/GCAMJX2 geocachers] to avoid being overwhelmed by garbage.


{| border="1" cellpadding="5"
|-
| '''Name''' || '''# of self/family/friends''' || '''Participating in rockets''' || ''' Participating in Lumi''' || '''Picnic'''
|-
| Everyone || x || A rocket, engines, and recovery wadding || A negative:  stencil or foil/transparancy || a dish to pass, a serving utensil, your own beverage
|-
| Tina || 3 || No - kite? ||  No || Mac&Cheese?  Plates, forks, napkins
|-
| Your name here || x || x || x || x
|-
|}




=== Virtual Social: Thursday April 11th ===
Come hang out virtually with your favorite geeks, and share what you've been up to or found interesting.


6 pm


Meeting link [https://us04web.zoom.us/j/74567357951?pwd=nQjQHcz7eKjaZ5YaHS2UGrat5UVUCv.1 here].


=== Lunch:  Thursday September 19th  ===
Anything else you want to see on the agenda? Let us know.
11:30 am, Apache Mall food court, near B&N.






=== Technical Meeting: Thursday September 12th ===
=== Virtual Technical Meeting: To be rescheduled ===
Chris Henderson on [http://www.ovirt.org oVirt].
Acu Dorin will present on opensource AI software and an effort he and some other folks have made to create a private version of a chatGPT like AI interface


oVirt, the first truly open and comprehensive data center virtualization management initiative, provides a venue for user and developer cooperation. The heart of the project is the open source code of oVirt, and the community is governed openly, modeled after the Apache Foundation, Eclipse, LVM, and many other well functioning Linux communities.


oVirt manages virtual machines, storage and virtualized networks. oVirt is a virtualization platform with an easy-to-use web interface. oVirt is powered by the Open Source you know - KVM on Linux.


This presentation will demonstrate setting up an oVirt environment and give you a taste of some of the features available.
=== Outside Social:  Friday March 22nd, 6 pm ===


Here are [http://k-lug.org/images/2/26/OVirt.pdf his slides].
Geocaching!  The March equinox is an excuse to [https://www.geocaching.com/blog/2024/03/celebrating-the-march-equinox/ find 3 geocaches during the week of the equinox].  If you've never geocached before, this is a great time to join us. Wear your hiking shoes, long sturdy pants, and otherwise dress for the weather.


When: Thursday September 12th - 6:00 pm - 7:30 pm
We will chase 3 multi-caches that start to the east and north of St Marys Hospital
https://www.geocaching.com/geocache/GC6G6R5
https://www.geocaching.com/geocache/GC5XDH0
https://www.geocaching.com/geocache/GC5XEQV


Where: RCTC Heintz Center Room HA107
If we have any DNF's, first choice replacement will be:
https://www.geocaching.com/geocache/GC56K4K


I skimmed through the logs, and none of our regulars seem to have found these, so hopefully everyone will qualify for the achievement.


Parking:
There is a limited quantity of 2 hour parking in St. Marys Park proper.  However, the neighborhood parking permit restriction opens back up starting at 5:30, so by starting at 6 pm you should be able to park on the street (and not be competing with employees for spots) for the duration of our explorations.




=== Virtual Technical Meeting: Thursday March 14th ===
Speaker cancelled due to illness, will reschedule.


=== Social:  Friday August 16th ===
Tim Massaro will come to our rescue, and will present on his Partyrock/Blackrock hackathon project, as well as brainstorming some future socials.
[http://www.jameco.com/webapp/wcs/stores/servlet/StoreCatalogDisplay?storeId=10001&catalogId=10001&langId=-1&rfr=1 Jameco] electronic components build night and blog writing.  Instructables will be sending us electronics to play with.  In exchange, we have to write up 3 Instructables posts about things we did with them.


• [http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=27422&langId=-1&productId=27422&storeId=10001&ddkey=http:StoreCatalogDrillDownView Standard Timer Single 8-Pin 555 Chip] (10)
6 pm


• [http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=103166&langId=-1&productId=103166&storeId=10001&ddkey=http:StoreCatalogDrillDownView Resistor Assortment, 540 pieces] (1)
Meeting link removed.


• [http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=20601&langId=-1&productId=20601&storeId=10001&ddkey=http:StoreCatalogDrillDownView Breadboard 3.25x2.125] (4)
Anything else you want to see on the agenda? Let us know.


• [http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=109154&langId=-1&productId=109154&storeId=10001&ddkey=http:StoreCatalogDrillDownView Battery Snap, 6 inch] (4)


• [http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=2112461&langId=-1&productId=2112461&storeId=10001&ddkey=http:StoreCatalogDrillDownView Battery, Super Alkaline, 9V] (4)


• [http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=135263&langId=-1&productId=135263&storeId=10001&ddkey=http:StoreCatalogDrillDownView Grab Bag of Electronics Components] (1)
=== Outside Social:  Saturday February 24th ===


• [http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=18041&langId=-1&productId=18041&storeId=10001&ddkey=http:StoreCatalogDrillDownView LED Grab Bag - assorted colors and shapes] (2)
It's supposed to be dry all week, there's no snow to fight with, the disc golf holes are present, and Saturday's forecast is for sunshine and a high of 46. So let's play disc golf!


Meet outside the RCTC field house, 2 pm.  Here is [http://maps.google.com/maps/ms?msid=217033483939111930234.0004a3795f42da701ae0b&msa=0&ll=44.015742,-92.422206&spn=0.003541,0.006942&iwloc=0004a37962daae4746296 a map].


How it works:


1. Have the Build Night: At the event build projects using parts from the Jameco electronics kit.
=== Virtual Technical Meeting: Thursday February 8th ===
Aaron Albertson will present a wrap up of this season's volunteer work with student robotics.


2. Post 3 Instructables: post 3 Instructables using the electronics from the kit. You are not limited to just these components, but projects must include parts from the kit. Projects can be as simple or advanced as you like. Anyone from your space is welcome to post an Instructable that counts towards the 3. These Instructables must include a link back to Jameco’s website. (Not posting these Instructables may affect K-LUG/PCIG chances to participate in future build nights).
6 pm
 
3. Brownie Points (not required): after the build night post a forum topic on Instructables about your event. Include pictures, stories, etc... Here are two examples from the May build night Instructables ran (we didn't participate): [http://www.instructables.com/community/Instructables-Build-Night-w-Bare-Conductive-Noi/ Noisebridge] and [http://www.instructables.com/community/High-current-electronic-sword-fighting-fancy-dri/ Makers Local 256]. They may even [http://www.instructables.com/community/Get-Your-Picture-on-the-Homepage/ feature our photo on their homepage.]
 
 
 
Your pre-preparation homework:  Brainstorm something to do with it.
 
 
 
We're meeting at the [http://tymkrs.com/rabbithole/ Toymakers hacker/maker space] again. 
 
547 Northern Heights Dr NE
 
Rochester MN 55906
 
6-9 pm
 
For anyone who hasn't been there yet, their house is on the north side of the road up a steep and twisted driveway; park on the road with a parking brake.  Walk up the driveway, <strike>up the steps, and ring the doorbell.</strike> into the open garage door, and into the house without needing to ring the doorbell.
 
 
 
 
 
 
=== Lunch FIELD TRIP:  Thursday August 15th  ===
11:30 am.  We'll try again (July failed the weather litmus test) - Thursdays on 1st, we'll take over a picnic table on the east end of Historic 3rd Street SW (that one way street on the north side of the Tap House and Billotti's).  If you're new and won't recognize the group, this might not be a good first event for you, as we may be hard to spot.
 
 
In case of bad weather, you can still converge on the Apache Mall food court near B&N.
 
 
=== Technical Meeting:  Thursday August 8th ===
Kevin A will present on DEF CON.
 
DEF CON is one of the oldest continuous running hacker conventions around, and also one of the largest. Kevin has attended several times and just got back from this year, he's eager to share his experiences.  At his presentation, he will talk about the conference, and computer security in general.  This year was especially interesting because the NSA, CIA, FBI, and AirForce, all major supporters of DEF CON, have been banned.  Questions will be welcome, come prepared.
 
6 pm, RCTC Heintz Center's HA107.
 
[http://www.roch.edu/html-spectrum/getting_to_ucr.html  Directions to Campus]
 
[http://www.rctc.edu/campustour/maps/heintzA.html  Heintz Center Building Map]
 
 
 
 
 
 
=== Lunch '''NOT A FIELD TRIP''':  Thursday July 18th  ===
 
'''Note second change in location'''
 
11:30 am.  <strike>Thursdays on 1st, we'll take over a picnic table on the east end of Historic 3rd Street SW (that one way street on the north side of the Tap House and Billotti's).  If you're new and won't recognize the group, this might not be a good first event for you, as we may be hard to spot.
 
 
In case of bad weather, you can still converge on the Apache Mall food court near B&N.</strike>
 
Courtesy of the forecasted heat indexes, we're back at the Apache Mall food court near B&N, at the usual 11:30 am.  We'll try again in August.
 
 
 
 
=== Social:  Friday July 12th ===
Sugru build night and Instructables writing.  Instructables.com sent us several mini packs of Sugru [http://sugru.com/ Sugru] self-setting rubber. Our challenge is to play with, create something and write up 4 sets of instructions, Instructables, about the things we did.
 
Your pre-preparation homework:  Brainstorm something more unique than smartphone bumpers and handle (bike, garden tools, etc etc) grips. If you have some Playdough bring it along and we can experiment before using the somewhat pricey real Sugru.  [http://www.instructables.com/tag/type-id/?sort=none&q=sugru  Here] are some ideas other people had and have already done/written up.
 
We're meeting at the [http://tymkrs.com/rabbithole/ Toymakers hacker/maker space] again. 
 
547 Northern Heights Dr NE
 
Rochester MN 55906
 
6-9 pm
 
For anyone who hasn't been there yet, their house is on the north side of the road up a steep and twisted driveway; park on the road with a parking brake.  Walk up the driveway, <strike>up the steps, and ring the doorbell.</strike> into the open garage door, and into the house without needing to ring the doorbell.
 
 
 
 
=== Technical Meeting:  Thursday July 11th ===
Matt Bruzek attended the Bay Area Maker Faire, and will tell us about his experience.  Anyone who attends the June KC Maker Faire is welcome to chime in too during discussion.
 
--
 
The Maker Faire ( http://makerfaire.com/ ) is billed as the "greatest show and tell on earth!".  I will share our experience from our trip to the 2013 Bay Area Maker Faire.  Try to describe the event, and suggest what to do if attend a Maker Faire in the near future.
 
--
 
 
When: Thursday July 11th - 6:00 pm - 7:30 pm
 
Where: RCTC Heintz Center, in or near Room HA107
 
 
 
=== Lunch '''FIELD TRIP''':  Thursday June '''27th'''  ===
 
'''Note nonstandard date and location.'''
 
11:30 am, RochesterFest.  Meet on the north side of the food area, we'll try to take over a picnic table or two.  If you won't recognize the group, this might not be a good first event for you, as we'll probably be hard to spot.
 
Haven't been to the RochesterFest food vendors area before?  They close down Civic Center Drive SE/3rd Ave SE between the library and the civic center.  Got a favorite "fair food" that you'd like to make sure you can find?  Here's a [http://www.rochesterfest.com/food-vendors.php list of the vendors, what they sell], and [http://cms.cws.net/content/rochesterfest.com/files/RochFEST%20coupon%20PAGE%202013%20FINAL.pdf coupons].
 
In case of bad weather, you can still converge on the Apache Mall food court near B&N.
 
 
 
=== Social:  Saturday June 22nd ===
We're stealing RochesterFest ideas, and finally going to see Cascade Meadows environmental learning center in NW Rochester.  There's a 10-2 event about pollinators (bees, butterflies,  etc).
 
When:  Noon
 
Where:  Cascade Meadow Wetlands & Environmental Science Center, [http://maps.google.com/maps?hl=en&q=Cascade%20Meadow%20Wetlands%20%26%20Environmental%20Science%20Center%202900%2019th%20St%20NW%20Rochester%20MN%2055901 2900 19th St NW Rochester MN 55901]
 
We'll meet outside the main doors in nice weather, or just inside them in less plesant weather.


Anything else you want to see on the agenda? Let us know.


Here is the description offered on their website:


Cascade Meadow is fluttering with excitement to observe National Pollinator Week with a celebration of Bees, Butterflies, Bats, and Birds and their wondrous work as pollinators!  We invite you to buzz over to a Pollination Celebration at Cascade Meadow.
=== Virtual Technical Meeting: Thursday January 11th, 2024 ===
 
Aaron Albertson will present a wrap up of this season's volunteer work with student robotics.
Exhibitors from across Minnesota will help you discover the plants and animals that sweeten the world through pollination!  The celebration will be fun for the whole family with lots of children’s activities hosted by Minnesota Master Naturalists.
 
Refreshments celebrating pollinators and their marvelous products will be available for purchase, but bring a water bottle to enjoy RPU’s award-winning drinking water. Admission is free and the Pollination Celebration is a Rochesterfest event!  Be sure to carpool for better parking!
 
 
 
=== Technical Meeting: Thursday June 13th ===
Dennis DeLorme took a computer museum tour in California, and is willing to tell us about it.  His main topic will be the [http://en.wikipedia.org/wiki/Difference_engine Babbage difference engine].  He'll also talk about connecting your LCD to ____.  Remember the 2005 LCD presentation and project?  Yep, that one.
 
When: Thursday April 11th - 6:00 pm - 7:30 pm
 
Where: RCTC Heintz Center Room HA107
 
If this presentation runs short and weather permits, we'll go play some disc golf afterwards.
 
Here are Dennis' [http://k-lug.org/images/d/d7/Lcd_201306.pdf slides] on the LCD portion.
 
 
=== Social:  Thursday May 23rd ===
As of 5/13, there were still no disc golf holes out at RCTC, and I'm not thrilled about bringing toddlers to East Park for several reasons.  So we're going to go to Stewartville, and play disc golf at [http://maps.google.com/maps?q=Bear+Cave+Park,+Stewartville,+MN&hl=en&sll=46.44186,-93.36129&sspn=7.359657,13.688965&oq=bear+cave+park&hq=Bear+Cave+Park,+Stewartville,+MN&t=m&z=16 Bear Cave Park].  We typically have a few spare discs to share among those attending, but if you plan on attending and need to borrow it's best if you can give us a heads up.  Otherwise you can throw your own non-golf disc, a ball, or a shoe.
 
Disc golf
 
Thursday May 23rd
 
6:30 pm, with 5:30 pm dinner at Wendy's south by Kohl's
 
Bear Cave Park, Stewartville
 
 
 
=== Lunch:  Thursday May 16th  ===
11:30 am, Apache Mall food court, near B&N.
 
 
 
=== Technical Meeting: Thursday, May 9th - FIRST Robotics Competition Demo at Byron High School ===
The Byron High School FIRST Robotics Competition team, just back from the Minnesota 10000 Lakes Regional, will fill us in on their experience in this exciting celebration of science, engineering and technology.
 
We will meet in the Byron High School Commons / Dining Hall at 6:30PM
 
 
Agenda:
 
5 min Overview of FRC and Byron Robotics
 
5 min Technical stuff on Bot
 
5 min Lessons Learned
 
5 min Mentor-ship Opportunities
 
20-40 min Ultimate Ascent game
 
There will be a "driver station" and arena mock up setup.
 
That will allow a few of us to try our luck at scoring within the standard 2 minute period.
 
The team only has two batteries so will probably run on last about 20 minutes or so.
 
 
Address:
 
1887 2nd Ave NW, Byron, MN 55920
 
Enter through doors by the flagpole. Note there is a choir concert at 7pm in the Auditorium
 
 
 
=== K-Lug and the Red Bull Creation 2013 Contest ===
Recently several [http://k-lug.org K-Lug] and [http://www.pcig.info PCIG] members entered a Maker Contest called Red Bull Creation 2013. We were given an Arduino Shield (called the TurBULL Encabulator and 5 Meters of  RGB LED light strips and 1 Meter of addressable RGB LED light strips. We bought 4 more addressable light strips and went to work...creating an invention of Peter Shabinos ...a touch sensitive Rock Climbing Wall called the WALL-O-TRON. Here is our video entry:  http://youtu.be/9SB-FD13yPs
 
More details on the project can be found here:
http://k-lug.org/RedBullCreation2013#Red_Bull_Creation_2013_-_K-LUG_Participation
 
 
 
=== Non-workday social:  Wednesday April 24th ===
Civic responsibility opportunity, participate in the Litter Bit Better campaign, geocache, and hang out with some K-LUGgers and geocachers.
 
5:30 pm, Quarry Hill
 
http://coord.info/GC3D7D5
 
 
 
=== Lunch:  Thursday April 18th  ===
11:30 am, Apache Mall food court, near B&N.
 
 
 
=== Show off and Networking event:  Saturday and Sunday, April 13-14th ===
K-Lug will have a booth at the Minne-Maker Faire, partially to demo our Deconstruction 2013 projects but mostly to network, see other team projects and have some fun. Open to the public, Cost is $8, online, and $10 at the door. Children under 15 free ...stop by and say hi!
 
Saturday, April 13, 2013 at 11:00 AM - 5pm  Sunday, April 14, 2013 11am - 5:00 PM (CDT)
 
The Hack Factory (http://www.tcmaker.org/blog/hack-factory/)
 
3119 E 26th St  Minneapolis, MN 55406
 
More details and pre-order tix http://minnefaire.org/
 
Talk to Tim or to Matt Bruzek if you want to try to arrange anything as a group (carpooling, dinner, after-hours activities, etc).
We plan to bike the greenway and visit axe-man
 
 
 
=== <strike>Social:  Friday April 12th</strike> ===
<strike>2-5 pm:  Rocket show, as part of the [http://ncral2013.com/schedule-of-events/ 67th Annual Convention of the North Central Region of the Astronomical League] .  The map and directions to the launch site can be found [http://ncral2013.com/maps/ here].</strike>
 
Cancelled due to bad weather forecasts.
 
 
 
=== Technical Meeting:  Thursday April 11th===
Jim Walts, retired IBMer is about to launch a new web based business called QPonCompass.com
This business includes a website, database, an iphone and Win/7 based app (in fact he's looking for help porting his app to Android and wondered if anyone on this email list is interested in taking that on?)
The meeting will be this Thursday:
 
What: April K-lug/PCIG meeting QPonCompass.com - Jim Walts
 
When: Thursday April 11th - 6:00 pm - 7:30 pm
 
Where: RCTC Heintz Center Room HA107
 
More details about QPonCompass.com:
We are technology lovers who saw a better way to share/deliver/distribute coupons. We recognized the dependence and love people have with their mobile devices, and how integrated into their lives these devices have become. 
Qpon Compass was created to provide shoppers with deals in the new venue they live in. The speed and movement of information makes paper coupons obsolete and bothersome.  We created a program that makes it easy to publish, learn about, purchase, and redeem deals for both the shopper and the business owner.
After spending time working for "mammoth technology companies", Jim and Kevin applied their skills and experience to the challenges of small business owners. Jim is passionate about making new technologies fun and practical; Kevin is a penny-pincher who strives to simplify daily tasks.
Qpon Compass was born!
Always forward-thinking, we are already looking at how we can make Qpon Compass better!
 
 
 
 
=== Social:  Sunday March 24th ===
Potato cannon courtesy of Dennis DeLorme, and Rube Goldberg device construction with whatever you bring.  Please sign up with what you are bringing so we can brainstorm some in advance, as Tina doesn't have a well stocked workshop to be raiding.  http://k-lug.org/SocialMeeting
 
1 pm, Tina's house (address and directions via the email list)
 
 
 
=== Lunch:  Thursday March 21st  ===
11:30 am, Apache Mall food court, near B&N.
 
 
 
=== Technical Meeting:  FIELD TRIP, Thursday March 14th ===
How to solder.  Kits will have been available for pre-order at the February technical meeting, or bring your own current project.  If you own your own soldering iron and are willing to bring it to share, that's great please do so.  Also needed for loan for the evening are folding chairs and tables.
 
Pre-orderable kits:
1)  http://www.parallax.com/tabid/768/ProductID/832/Default.aspx  for $7, a colored lights robot badge.<br>
2)  http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_2131207_-1  for $8, a two option decision maker.<br>
3)  http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_2136999_-1  for $11, Simon Says.<br>
 
 
 
We're meeting at the Toymakers hacker/maker space again.  http://tymkrs.com/rabbithole/
 
547 Northern Heights Dr NE
 
Rochester MN 55906
 
6-9 pm
 
For anyone who didn't go there in January, their house is on the north side of the road up a steep and twisted driveway; park on the road with a parking brake.  Walk up the driveway, <strike>up the steps, and ring the doorbell.</strike> into the open garage door, and into the house without needing to ring the doorbell.
 
 
Also, PCIG elections.
 
 
 
 
=== K-Lug and the Deconstruction and Minne-Faire ===
Recently [http://k-lug.org K-Lug] and [http://www.pcig.info PCIG] members met at [http://tymkrs.com/rabbithole/ The Rabbit Hole] Maker space to participate in the [http://www.thedeconstruction.org Deconstruction 2013]. We has had a booth at the [http://minnefaire.org/ Minne-Faire] where we demonstrated our projects. I'm leaving a link here for people to find more info about our projects:
http://thedeconstruction.org/team/rabbit-hole/
http://k-lug.org/Main_Page/Deconstruction2013
 
 
 
=== Technical Meeting:  Thursday February ''21st'' ===
Dean Johnson, on "How I Work".  Slides are [http://k-lug.org/HowIWork here] or [https://docs.google.com/file/d/0B8U2owv7iPY8bHFuSENHNGFNdmM/edit?usp=sharing&pli=1 here].
 
 
As regularly scheduled, this would fall on Valentine's Day.  So as to not get anyone in trouble with their significant other, or to cause decreased attendance for our speaker, we've pushed this one back a week.  Yes, you now can see your favorite geeks twice in one day if you also attend lunch.
 
 
Other agenda topics:<br>
-Our delayed K-LUG officer elections (president, vice president, treasurer) and PCIG nominations.<br>
-"How to solder" group kit orders, for March hands-on technical meeting.  Please bring cash in exact change!<br>
1)  http://www.parallax.com/tabid/768/ProductID/832/Default.aspx  for $7, a colored lights robot badge.<br>
2)  http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_2131207_-1  for $8, a two option decision maker.<br>
3)  http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_2136999_-1  for $11, Simon Says.<br>
-What else?
 
 
When: Thursday February 21st - 6:00 pm - 7:30 pm
 
Where: RCTC Heintz Center Room HA107
 
[http://www.roch.edu/html-spectrum/getting_to_ucr.html  Directions to Campus]
 
[http://www.rctc.edu/campustour/maps/heintzA.html  Heintz Center Building Map]
 
 
 
 
 
=== Lunch:  Thursday February 21st  ===
11:30 am, Apache Mall food court, near B&N.
 
 
 
=== Unofficial social:  Thursday February 14th ===
Who needs hearts when you can eat BRAINS!  Zombie-themed game night at Tina's.  Family and friends are welcome.  It'd be nice if you could bring a drink or snack to share, or some folding chairs.


6 pm
6 pm


And KLUG officer elections.


=== Social:  Saturday February 2nd, 1 pm ===
Anything else you want to see on the agenda? Let Tina know.
Let's piggyback on Winterfest. 
 
http://www.rochestermn.gov/departments/park/activities/winter/WinterFest/WinterFest_Calendar.asp
 
I've tried to pick something cheap or free for the official social, but I'll also cite one activity that may be of interest for group members that has a higher entry fee if anyone wants an unofficial social (sorry, my family won't be making that one).
 
What:  Horse drawn sleigh rides and bonfire, hot cocoa and cookies, plus free museum day at the History Center Museum.<br>
Where:  [http://www.olmstedhistory.com/events/1111/sleigh-rides-and-free-museum-day/ The History Center of Olmsted County], 1195 West Circle Drive SW<br>
When:  Saturday February 2nd, 1 pm<br>
Cost:  free will donation, which goes to Rochester Special Olympics.
 
 
 
Unofficial:  Thursday February 7th, Bacon Fest!  $20.  http://baconfestrochester.wordpress.com/ <br>
Event runs 5-9 pm, I'll set a K-LUG meeting time of 6 pm.  You'll have to look for someone else to gather around though, my family won't be attending this one.<br>
Canadian Honker Event Center at the Ramada Hotel, 1517 16th St SW<br>
At the door:  CASH ONLY<br>
Alternate method of payment: Tickets can also be purchased online by making a $25 donation to the Sunset Terrace Playground project. The deadline is Wednesday, February 6th at midnight. Tickets purchased online can be picked up at the event.
 
 
 
=== Social:  Saturday, January 19th ===
The following schedule is tentative, because the official movie schedule is released on Wednesday or Thursday in a week for that weekend.  That's not a lot of notice for planning a group event.  But I've been informed by someone who movie-goes more than my ~1x/year that schedules don't tend to vary *too* much from week to week, so we'll use the current info to plan around.
 
 
Saturday January 19th<br>
1 pm - lunch at Kingdom Buffet<br>
3:20 pm - The Hobbit (2D) at Cinemagic<br>
Not the fastest route, but the most straight forward, if you're unfamiliar with either location:  http://goo.gl/maps/jnGFw
 
 
Details:<br>
Lunch at Kingdom Buffet, followed by a movie.  Feature movie is The Hobbit (2D), but there are several others starting in that same general timeframe if you'd rather attend something else.  Alternatively, you can do just lunch or just the movie.  We'll meet for lunch at 1 pm, 1639 N Broadway.  The Hobbit is at 3:20 at Cinemagic (2171 Superior Drive N.W., by the old Westfire).  If Chinese isn't your favorite, please don't be intimidated; Kingdom Buffet does have several buffet items that are more Midwestern acceptable (bbq ribs, teriyaki chicken shishkabobs, salad bar with jello, pudding, hard boiled eggs and fruit, ice cream, etc), it's our preferred spot to feed our toddler when we're out and need to put food in front of her immediately but don't want fast food.
 
 
Other movies being shown at approximately the same timeframe at Cinemagic:<br>
3:00 - Parental Guidance (PG)<br>
3:25 - A Haunted House (R)<br>
3:40 - Zero Dark Thirty (R)<br>
3:50 - Les Miserables (PG-13)<br>
(unfortunately this is a much shorter list than it had been last weekend, we lost ~1/2 the options)
 
Both Mayo and Think Bank have discounted movie ticket rates, but I think those are only valid on non-matinee priced movies.
 
 
 
=== Lunch:  Thursday January 17th  ===
11:30 am, Apache Mall food court, near B&N.
 
 
 
=== Technical Meeting:  FIELD TRIP, FRIDAY, January 11th, 2013 ===
We're checking out a local hacker/maker space.  6 pm, we'll be tagging along to their standard monthly meeting.  Their website:  http://tymkrs.com/rabbithole/
 
547 Northern Heights Dr NE
 
Rochester MN 55906
 
 
If it's easy for you, throw in a folding chair.  We'll provide the leftover pop from the December party, and some treats as usual.  They've said if you have a project to work on, you should bring it with you.
 
Because of the rescheduling and the field trip, we'll put off officer elections until February.




Line 594: Line 201:


=== Older News ===
=== Older News ===
 
* [[OldNews2023]]
* [[OldNews2022]]
* [[OldNews2021]]
* [[OldNews2020]]
* [[OldNews2019]]
* [[OldNews2018]]
* [[OldNews2017]]
* [[OldNews2016]]
* [[OldNews2015]]
* [[OldNews2014]]
* [[OldNews2013]]
* [[OldNews2012]]
* [[OldNews2012]]
* [[OldNews2011]]
* [[OldNews2011]]

Latest revision as of 01:29, 15 October 2024



Virtual Social: Thursday October 10th

6 pm

Yes, timing worked out that you'll see us twice in the same week.

Meeting link removed.

Anything else you want to see on the agenda? Let us know.


Potential October outdoor social - 18 holes of mini golf

https://bringmethenews.com/minnesota-lifestyle/new-18-hole-mini-golf-course-coming-to-rochester https://krocnews.com/rochester-mns-largest-mini-golf-course-is-about-to-open/


Socials brainstorming: Fall or winter

-Murder mystery. The host needs to buy a kit at a gaming store to get the event started.

-Jim Henderson, "Silicon Valley" documentary

-Bowlocity laser tag. 5-6 people minimum needed.

-Liquid nitrogen ice cream. This needs a non-Tina organizer. Dennis DeLorme has 2 recipes. We need safety equipment and someone trained enough to keep us from freezing ourselves.


Pending potential presentations

Jon Gullixson: gnucash or www :: Mechanize


Litter Bit Better in-person social (outside), Monday October 7th

6:15 - 7:30 pm

This is the first time Rochester is running a fall edition of Litter Bit Better, so we're going to go clean up a second time this year. Pine Ridge Estates Park, which you may recognize as where we have previously ice cream picnicked, and flown kites. Map

Bags provided. You bring your own gloves, grabbers, and sense of civic duty. No shoreline, yes woods (mowed park + woods = 5.1 acres), and you might want a headlamp.

As usual we are teaming up with the geocachers to avoid being overwhelmed by garbage.


Virtual Social: Thursday September 12th

6 pm

Meeting link removed. Anything else you want to see on the agenda? Let us know.


Outside Social: Thursday September 5th

Disc golf! Meet outside the RCTC field house, 6 pm. Here is a map.


Outside Social: Friday August 30th

Disc golf! Meet outside the RCTC field house, 6 pm. Here is a map.


Virtual Social: Thursday August 8th

6 pm

Meeting link removed.

Anything else you want to see on the agenda? Let us know.


Virtual Social: Thursday July 11th

6 pm

Meeting link removed.

Anything else you want to see on the agenda? Let us know.


Outdoor Social: Thursday June 27th, 11:45 am

Lunch at RochesterFest. We'll be sitting at a picnic table on the far side of the tent from the music, to hopefully lower the decibel level enough to still talk.

Food trailers are supposed to be open by noon, 11:45 am will give us a little better chance at getting parking.


Virtual Social: Thursday June 13th

6 pm

Meeting link removed

Anything else you want to see on the agenda? Let us know.


Virtual Social: Thursday May 9th

6 pm

Meeting link removed

Anything else you want to see on the agenda? Let us know.


Geocaching in-person social (outside), Friday May 3rd

6 pm

Park and walk in a neighborhood in NE Rochester.

Park near 1 - Odin on Whiting Lane NE's cul de sac. We'll walk from there to a couple of other geocaches (2, 3), then back to #1, and then decide if we're walking or driving to 4.



Litter Bit Better in-person social (outside), Tuesday April 30th

6:15 - 7:30 pm

Back to our usual Cascade Lake Park.

Bags provided. You bring your own gloves, grabbers, and sense of civic duty. There is shoreline.

As usual we are teaming up with the geocachers to avoid being overwhelmed by garbage.


Virtual Social: Thursday April 11th

Come hang out virtually with your favorite geeks, and share what you've been up to or found interesting.

6 pm

Meeting link here.

Anything else you want to see on the agenda? Let us know.


Virtual Technical Meeting: To be rescheduled

Acu Dorin will present on opensource AI software and an effort he and some other folks have made to create a private version of a chatGPT like AI interface


Outside Social: Friday March 22nd, 6 pm

Geocaching! The March equinox is an excuse to find 3 geocaches during the week of the equinox. If you've never geocached before, this is a great time to join us. Wear your hiking shoes, long sturdy pants, and otherwise dress for the weather.

We will chase 3 multi-caches that start to the east and north of St Marys Hospital https://www.geocaching.com/geocache/GC6G6R5 https://www.geocaching.com/geocache/GC5XDH0 https://www.geocaching.com/geocache/GC5XEQV

If we have any DNF's, first choice replacement will be: https://www.geocaching.com/geocache/GC56K4K

I skimmed through the logs, and none of our regulars seem to have found these, so hopefully everyone will qualify for the achievement.

Parking: There is a limited quantity of 2 hour parking in St. Marys Park proper. However, the neighborhood parking permit restriction opens back up starting at 5:30, so by starting at 6 pm you should be able to park on the street (and not be competing with employees for spots) for the duration of our explorations.


Virtual Technical Meeting: Thursday March 14th

Speaker cancelled due to illness, will reschedule.

Tim Massaro will come to our rescue, and will present on his Partyrock/Blackrock hackathon project, as well as brainstorming some future socials.

6 pm

Meeting link removed.

Anything else you want to see on the agenda? Let us know.


Outside Social: Saturday February 24th

It's supposed to be dry all week, there's no snow to fight with, the disc golf holes are present, and Saturday's forecast is for sunshine and a high of 46. So let's play disc golf!

Meet outside the RCTC field house, 2 pm. Here is a map.


Virtual Technical Meeting: Thursday February 8th

Aaron Albertson will present a wrap up of this season's volunteer work with student robotics.

6 pm

Anything else you want to see on the agenda? Let us know.


Virtual Technical Meeting: Thursday January 11th, 2024

Aaron Albertson will present a wrap up of this season's volunteer work with student robotics.

6 pm

And KLUG officer elections.

Anything else you want to see on the agenda? Let Tina know.




Older News

OLD SITE

Content from our old website can be accessed here.

Retrieved from "https://k-lug.org/index.php?title=OldNews&oldid=3212"